Skip to main content

CRM Contacts: Add and invite people from your CRM

Add and invite the contacts from your connected CRM object to a Room: Our Team section, Stakeholders Map, Share room drawer, Stakeholders table, next steps and comments.

Written by Nadav Weiss

CRM contacts are the people on the CRM object a Room is connected to, shown inside the Room as people you can add or invite. When a Room is connected to a CRM object, Aligned suggests those CRM contacts in the Our Team section, the Stakeholders Map, the Share room drawer, the Stakeholders table, the stakeholders list at the top of the Room, and the people lists for next steps and comments. You can add a CRM contact to a Room without sending an invite, or add them and invite them to the Room in one step. CRM contacts do not appear in Rooms connected to a Salesforce Account.

Prerequisites & Requirements

  • CRM connection: the Room is connected to a CRM object. Rooms connected to a Salesforce Account do not show CRM contacts.

  • Plan: availability depends on your plan. See the Aligned pricing page.

  • Permissions: everyone on your team who can see the Room can add CRM contacts to the Room and invite them.

Where CRM contacts appear in a Room

CRM contacts appear in six places in a Room that is connected to a CRM object:

  • Our Team section: add a CRM contact to the section, with or without an invite.

  • Stakeholders Map: add a CRM contact to the map, with or without an invite.

  • Share room drawer: CRM contacts appear as suggested contacts when you invite people by email.

  • Stakeholders table in Insights: CRM contacts who have not been invited appear at the end of the table, with an invite button.

  • Stakeholders list at the top of the Room: CRM contacts appear under their own heading, with an invite button.

  • Next steps and comments: CRM contacts appear when you assign a next step or mention someone in a comment.

A CRM contact who is already in the Room is not suggested again. Aligned matches people by email address, so a CRM contact who visited the Room or was added by hand appears once, as the person already in the Room.

Connect a Room to a CRM object

CRM contacts appear after a Room is connected to a CRM object. To connect a Room from the Share room drawer:

  1. Open the Room and click Share.

  2. In the Share externally tab, go to Connect this Room to get CRM contacts. The heading names your CRM.

  3. Choose the object type and the object.

  4. Click Connect. The message "Object connected successfully" appears.

CRM contacts can take a few minutes to appear after you connect a Room. Until they appear, the Share room drawer shows "No CRM contacts available". See Troubleshooting & FAQ below.

Add a CRM contact to the Our Team section

The Our Team section shows clients who is working on the deal. You can add a CRM contact to the Our Team section without typing their details:

  1. In the Room, go to the Our Team section and click Manage client team.

  2. In the Display team members drawer, select the Client team tab.

  3. Under Add to section, find the CRM contact and click Add. CRM contacts who are not in the Room yet carry the CRM icon next to their name.

  4. Review the details in the Add client drawer that opens. The details come from your CRM. You can correct the full name, job title, and phone number. You cannot change the email address.

  5. Click Preview invite email if you want to see the email first.

  6. Click Add to section to add the contact without sending an invite, or click Add and invite to room to add the contact and send the Room invitation.

Manage people in the Our Team section

The Client team tab in the Our Team section drawer splits people into two groups:

  • In section: people shown in the Our Team section. Each row has a three-dot menu.

  • Add to section: everyone who is not shown in the section, such as people who visited the Room, people who were invited, and CRM contacts nobody has added yet. Each row has an Add button and no menu.

The Add to section heading stays pinned at the bottom of the list while you scroll, so you can see there are people to add even when the section list is long. Use the filters at the top of the drawer, All, In section, and Add to section, to show one group at a time.

The three-dot menu on a person in the section shows different options depending on the person:

  • Added without an invite: Invite to room, Edit, Remove from section.

  • Invited, has not entered the Room yet: Re-invite to room, Edit, Remove from section.

  • Has entered the Room: Edit, Remove from section.

Remove from section takes a person out of the Our Team section only. Remove from section does not delete the person, does not cancel an invitation, and does not remove the person's access to the Room. The person moves to the Add to section group, and you can add them back at any time.

Hover over the CRM icon next to a name to see the tooltip "CRM contact that's not in the room". The CRM icon disappears once the person is invited.

Add a CRM contact to the Stakeholders Map

The Stakeholders Map works the same way as the Our Team section, with three differences: the groups are called In stakeholder map and Add to stakeholder map, the drawer includes an optional Stakeholder role field, and removing a person takes their card off the map. To add a CRM contact to the Stakeholders Map:

  1. In the Room, click Insights at the top of the page, then select the Stakeholders map tab.

  2. Click the add icon in the toolbar at the bottom of the map to open the Add stakeholder drawer.

  3. Under Add to stakeholder map, find the CRM contact and click Add.

  4. Review the details, and choose a Stakeholder role if you want.

  5. Click Add to stakeholder map to add the contact without sending an invite, or Add and invite to room to add the contact and send the Room invitation.

Remove from stakeholder map takes a person's card off the Stakeholders Map only. It does not delete the person, cancel an invitation, or remove their access to the Room.

The Our Team section and the Stakeholders Map stay in step for people who are invited or who enter the Room: those people appear in both. Adding someone without an invite affects only the place you added them from.

Invite CRM contacts from the Share room drawer

The Share room drawer suggests CRM contacts when you invite people to a Room by email:

  1. Open the Room and click Share.

  2. In the Share externally tab, under Share via email, see Suggested contacts below the email field. Suggested contacts are CRM contacts who have not entered the Room yet.

  3. Click a suggested contact to add them to the Invite with email field. The next suggestion takes the free place.

  4. To see every CRM contact, click in the Invite with email field. People are grouped under GUESTS (people who entered the Room), CRM CONTACTS, and CONTACTS (your Google contacts, if connected). The group heading stays pinned while you scroll.

  5. Click Preview & Send.

You cannot re-invite someone from the Share room drawer. To re-invite, use the Stakeholders table, the stakeholders list at the top of the Room, or the Our Team section.

Invite and re-invite from the Stakeholders table

The Stakeholders table in the Visits tab of Insights lists everyone in the Room and the CRM contacts who have not been invited yet. The Stakeholders table was previously called Visitors. To invite a CRM contact from the Stakeholders table:

  1. In the Room, click Insights at the top of the page.

  2. Select the Visits tab and scroll to the Stakeholders table.

  3. Click the Suggested invites filter to show only CRM contacts who have not been invited.

  4. Click Invite to room in the First entry column.

After you invite a CRM contact, the button changes to Re-invite. Once the person enters the Room, the First entry column shows the date instead.

The filters above the Stakeholders table are All, In room, Invited, and Suggested invites. Each filter shows how many people are in that group.

Invite from the stakeholders list at the top of the Room

The stakeholders list at the top of the Room shows who visited and which CRM contacts you can invite:

  1. Click the avatars at the top of the Room.

  2. The list shows STAKEHOLDERS, the people who entered the Room, and CRM CONTACTS, the people you can invite.

  3. Click the invite icon next to a CRM contact to invite them. The icon changes to re-invite.

  4. Click Full stakeholders list to open the Stakeholders table.

A CRM contact you invite stays in the CRM CONTACTS group until they enter the Room. Once they enter, they move to the STAKEHOLDERS group.

Assign a next step or mention a CRM contact

CRM contacts appear when you assign a next step or mention someone in a comment. Assigning a next step to a CRM contact, or mentioning a CRM contact in a comment, sends them an invitation to the Room. A line under the CRM CONTACTS heading says so: "They'll get an invite to the room when you assign them." The same line appears under EMAIL CONTACTS, because those people also get an invitation.

After you assign a next step to a CRM contact, the message "Task assigned and invitation sent successfully" appears.

How often Re-invite sends an email

Re-invite is always available and always confirms with a message. Aligned sends at most one invitation email to the same person in any 24 hours. If you click Re-invite again within 24 hours of the last invitation, Aligned confirms but does not send another email.

What clients see

Clients see CRM contacts only through what you do with them:

  • Invite to room, Add and invite to room, Re-invite: the person receives the Room invitation email. Use Preview invite email to see it first.

  • Assigning a next step or mentioning in a comment: the person receives the Room invitation email.

  • Add to section without an invite: the person appears in the Our Team section, which anyone who opens the Room can see. The person receives no email.

  • Suggestions, the CRM icon, the Stakeholders Map, and the Stakeholders table: clients never see them.

Limitations

  • CRM contacts do not appear in Rooms connected to a Salesforce Account.

  • The Share room drawer shows up to six suggested contacts at a time. The full list of CRM contacts is in the Invite with email field.

  • The stakeholders list at the top of the Room shows up to four stakeholders, plus a count of the rest. The count is not clickable. Use Full stakeholders list to see everyone. The CRM CONTACTS group in the same list has no limit and scrolls.

  • You cannot change the email address of a CRM contact in Aligned, and you cannot upload a photo for a CRM contact.

  • You cannot re-invite someone from the Share room drawer.

  • Aligned sends at most one invitation email to the same person in any 24 hours.

  • Changes you make to a CRM contact's details in Aligned are not written back to your CRM.

Troubleshooting & FAQ

No CRM contacts available

What it means: the Share room drawer has no CRM contacts to suggest. There are three reasons: Aligned is still pulling the contacts after you connected the Room, the connected CRM object has no contacts, or the Room is connected to a Salesforce Account.

How to fix: wait a few minutes after connecting the Room, then close and reopen the Share room drawer. If the message stays, open the object in your CRM and check that contacts are associated with it. If the Room is connected to a Salesforce Account, connect the Room to a different CRM object.

Contacts from other integrations will appear here once they're available

What it means: the stakeholders list at the top of the Room has no CRM contacts to suggest, for the same reasons as "No CRM contacts available" above.

How to fix: follow the steps under "No CRM contacts available".

CRM contacts still do not appear

If the Room is connected to a CRM object that has contacts and CRM contacts still do not appear after a few minutes, contact Aligned support through the in-app chat. Include the Room link and the name of the connected CRM object, so support can check the connection.

Why don't I see a CRM contact I expected?

A CRM contact does not appear as a suggestion when the person is already in the Room, either because they entered the Room or because someone added them by hand. Aligned matches people by email address. Look for the person under In section, Add to section, or STAKEHOLDERS instead.

Does Remove from section remove a person from the Room?

No, Remove from section only takes a person out of the Our Team section. The person keeps any invitation and any access they already have, and moves to the Add to section group.

What does the CRM icon mean?

The CRM icon means two different things depending on where you see it. In the Our Team section, the Stakeholders Map, the Share room drawer, and the stakeholders list, the CRM icon marks a CRM contact who is not in the Room yet, and it disappears once the person is invited. In the CRM enrichment column of the Stakeholders table, the CRM icon shows that the person exists in your CRM, and it stays there.

I invited a CRM contact. Why are they still under CRM CONTACTS?

An invited CRM contact stays under CRM CONTACTS in the stakeholders list until they enter the Room. Once they enter, they move to STAKEHOLDERS. In the Stakeholders table, the button changes to Re-invite right away.

I clicked Re-invite twice. Did the person get two emails?

No, the person did not get two emails if both clicks were within 24 hours. Aligned sends at most one invitation email to the same person in any 24 hours.

What happens to CRM contacts if I disconnect the Room from the CRM?

Disconnecting a Room from the CRM does not delete anyone. People you added or invited stay as they are. CRM contacts nobody has added yet stay as suggestions, without the CRM icon, and you can still add them.

Related articles

Did this answer your question?